Spindle and headstock issues
Bearing wear, runout problems, lubrication faults and unusual noise are all common headstock issues. We diagnose and advise on whether repair or specialist refurbishment is the right path.
CNC lathe repair
CNC Lathe Repair Specialists
Practical repair support for CNC lathes, turning centres and sliding head machines across the North West, North East and Midlands.
CNC lathe expertise
Lathe faults handled with experience and care
A CNC lathe out of action is rarely a small problem. Production schedules slip, batches stall, and the longer a machine sits idle the more pressure builds on every other machine in the workshop. Ringstones provides hands-on lathe repair support that focuses on getting machines back into reliable use quickly.
Whether the fault is mechanical, related to wear, or showing up as poor surface finish or dimensional drift, we work through the symptoms methodically. Where specialist parts or controls expertise are needed beyond our remit, we'll say so plainly and help define exactly what's required so the right next step can be taken.
Lathe repair work is supported across machining centres, two-axis turning centres, mill-turn machines and conventional manual lathes. Ringstones engineers regularly work on Mazak, Haas, Doosan, DMG Mori, Colchester and other common manufacturers.
Tailstock and barrel alignment
Out-of-alignment tailstocks cause taper, poor finish and tool damage. Realignment, quill issues and tailstock bearing problems are all areas Ringstones can support.
Turret and tooling problems
Indexing faults, turret lock issues, tool offset drift and repeated tool collisions all point to turret-related problems that need careful investigation.
Chuck and workholding faults
Hydraulic chuck pressure loss, jaw wear, gripping problems and runout on the chuck face all affect part quality. We can advise on repair, replacement or adjustment.
Way and slide wear
Sticking slides, repeatability issues and visible wear on ways are common on older lathes. We assess condition and advise on practical options.
General fault investigation
Where the cause of a problem isn't obvious, we work through the machine systematically with the operator to narrow down what's happening.
Lathe brands supported
Common manufacturers we work on
Lathe repair support is provided across most common workshop manufacturers. If your machine isn't listed, contact us — we can usually still help.
- Mazak
- Haas
- DMG Mori
- Doosan
- Colchester
- Hurco
- XYZ
- Harrison
Need machine tool support?
Speak to Ringstones about repairs, maintenance, servicing or installation support across the North West, North East and Midlands.